Protégé - Mentor - 01-Smoke
Brand
FibreGuard
Number of colour ways
8
Characteristics
Chenille
Vertical repeat cm
34.00
Vertical repeat inch
13.39
Horizontal repeat cm
35.00
Horizontal repeat inch
13.78
Face in
Yes
Full roll diameter cm
25
Full roll diameter inch
9.84
Average piece length m
40
Minimum for special colour m
1000
Delivery time weeks special lab dip
2
Care code comments
iron on reverse side
Use codes
Curtains
Yes
Upholstery
Yes
Bed covering
Yes
Accessories
Yes
BS 5852 Source 0
Yes
BS 5852 Source 1 (with treatment)
Yes
CAL 117
Yes
FMVSS 302
Yes
NFPA 260
Yes
Composition
85% Polyester, 15% Cotton
Average yarn number
18.52
Construction
64.57x22.84
Woven
Yes
Useable width cm
140
Useable width inch
55.12
Full width cm
142
Full width inch
55.91
Weight g/m²
472
Thickness mm
1.320
Colouring type
Piece dyed
Filament or staple
74% filament + 26% staple
Textured or non textured
74% textured + 26% not textured
Treatment
Stain free technology
Yes
Type of finish
Stenter
Yes
Weaving type
Jacquard
Yes
Martindale rubs
80,000
Colour fastness to light
6
Wyzenbeek double rubs
150,000
Pilling
4-5
Brush pilling
4-5
Wyzenbeek wire screen double rubs
15,000
Wyzenbeek cotton duck double rubs
150,000
Colour fastness to light - ISO 105-B02
Colour fastness to light
6
Colour fastness to water - ISO 105-E01
Colour fastness to water
5
Colour fastness to dry rub - ISO 105-X12
Colour fastness dry rub
4-5
Colour fastness to wet rub - ISO 105-X12
Colour fastness wet rub
4-5
Tearing strength - ISO 13937-3
Tearing strength warp N
53
Tearing strength weft N
83
Tensile strength - ISO 13934-1
Tensile strength warp N/5cm
2000
Tensile strength weft N/5cm
750
Elongation - ISO 13934-1
Elongation warp %
43
Elongation weft %
11.5
Seam slippage - ISO 13936-2
Seam slippage warp mm
4
Seam slippage weft mm
3
Dimensional stability (indicated in %) - ISO 3759
Dimensional change warp
0.19
Dimensional change warp after ironing with steam
-0.07
Dimensional change warp after ironing without steam
0.13
Dimensional change weft
-0.08
Dimensional change weft after ironing with steam
-0.07
Dimensional change weft after ironing without steam
-0.07
Sound absorption performance for upholstery
Weighted Sound Absorption Coefficient (αw) – Value - Upholstery - ISO 11654 (Annex A & B)
0.75
Weighted Sound Absorption Coefficient (αw) – Class – Upholstery - ISO 11654 (Annex A & B)
C
Sound Absorption Average (α) – Upholstery - ASTM C423
0.67
Noise Reduction Coefficient (NRC) - Upholstery - ASTM C423
0.65
Sound transmission
Weighted Sound Reduction Index (RW) - ISO 717-1
8
Sound Transmission Class (STC) - ASTM E413
7
Resistance to domestic washing 30° C, indicated in % - ISO 6330
Dimensional change warp
-0.79
Dimensional change warp after ironing
-0.93
Dimensional change weft
-1.62
Dimensional change weft after ironing
-1.32
Colour fastness ISO 105 C06
5
Resistance to domestic washing 60°C, indicated in % - ISO 6330
Dimensional change warp
-1.95
Dimensional change warp after ironing
-1.99
Dimensional change weft
-3.14
Dimensional change weft after ironing
-3.04
Colour fastness ISO 105 C06
4-5
Resistance to dry cleaning P, indicated in % - ISO 105 D01
Dimensional change warp
-1.19
Dimensional change warp after ironing
-2.18
Dimensional change weft
-2.12
Dimensional change weft after ironing
-2.18
Colour fastness ISO 105 D01
5